Operation Wavelengths:      Red 650nm    Infrared 785nm
   Penetration Depth Red:       Approx 6mm
   Penetration Depth Infrared: Approx 55mm

   Output Power:                    Red 20 mW    Infrared 80 mW
   Total Output:                     100mW
   (The output power is sufficient ot achieve 2-4cm2.  This is the perfect dose
   acknowledged in LLLT)

   MZB Data:                          200 mW/cm2
  (Power density is below the MZB data ie. no burns can occur.  MZB= maximum  allowed strength of beams according to laser standard IEC 60825-1)

Laser Class:                        1M
Medical Class:                      2
Lifetime of Laser Diodes:       >10,000 working hours

Power Supply
Output voltage:                    SV
Output Current:                    min 400 mA

Batteries
LiPo - accumulator (Lithium Polymere)
Life Span:                            Min. 300 charging cycles
Nominal Capacity:                 800 mAh

Laser diodes
PalmLasers work with semiconductor lasers - or better known as laser diodes.  Depending on the active region material,
the wavelength is different:

InGaAlP: 630 - 685 nm

GaAlAs: 780 - 820- 870 nm

GaAs: 904, 905 nm

These lasers are used for laser-phototherapy. Laser diodes are durable, robust and reliable.
We differentiate between pulsed lasers and cw-lasers (cw = continuous wave).  A cw diode which is only switched on and off is not a real pulsed laser. From this there is a big difference in the output power, as a real pulsed laser has a few watts per pulse.